Motor… on… axle… Yep, it's happening!
These beauties are machined from 7075 aluminum and feature Gr. 5 titanium gears and axle shafts. They also have adjustable c hubs like our shaft axles. Speaking of adjustability, the servo mount is slotted, and the upper link riser can be attached in two different positions. They also come with Gr.5 titanium steering links. You'll have to bend the drag link to suit your own setup. As with all of our axles they come standard with Low Blow knuckles.
Roughly 120mm wide, hex to hex using stock size hex's.
Gear ratio: 90.1:1
Motor mount spacing: 9mm, designed around the Micro Komodo and similar size motors.
Lower link mounts are 11mm wider than stock and shock mounts are 12mm wider than stock.
The motor guard (optional) will need notched for the wires to pass through
NOTES
These are not a universal fit, drop in axle. They will bolt on the Dementor and Valkyrie with our links. Other setups will require modifications.
The pinion have a tiny set screw, it's a pain. I also included some regular screws that you can install and cut off.
You will need to bend your links to clear the motor and transmission.
The steering link will need bent by you. You must leave space between what you’re bending it with to allow the metal room to bend. I’ll post a how to video on it before you all receive your axles.
BOA mount is sized for our 3s battery or similar size.
A dual esc will be needed, Dinky RC or BKTT both offer them.
You will need a radio that has the ability to mix the throttle channel. I chose the Flysky Noble NB4. Please do your homework on how to set up your radio.
INCLUDES
1 - Axle
1 - Servo Mount
Steering Links
Pinion for 1.5mm shaft (2mm available on request)
boa mount
motor guard
