We took our weight hangers a step further and built them into the knuckles! Designed to get all the weight as low as possible they are machined from brass with 5 tungsten slugs so you can dial the weight bias of your rig to perfection. The hardware for the steering links has been beefed up to M2 so no more snapped screws! These will tuck into a Hard Park wheel beautifully with either of our hubs to reduce scrub steer. The slugs are a tight fit, you must install them square. When you get it right they will slide in aprox 80%. They can easily be pressed in with needle nose pliers the rest of the way. The tungsten is much harder than the brass so don’t force them in until they seat. You will have to drill out your pivot balls in your steering linkage to accept larger diameter screws. Or pick up a steering link from 3flow9 rc.
DOES NOT FIT THE NEWER OGRC +5 AXLE HOUSINGS. THEY ARE 2MM THICKER AT THE MOUNTING POINT. LOW BLOWS MEASURE 12MM, OGRC IS 14MM.