Motor… on… axle… Yep, it's happening!
These beauties are machined from 7075 aluminum and feature Gr. 5 titanium gears and axle shafts. They also have adjustable c hubs like our shaft axles. Speaking of adjustability, the servo mount is slotted, and the upper link riser can be attached in two different positions. They also come with Gr.5 titanium steering links. You'll have to bend the drag link to suit your own setup. As with all of our axles they come standard with Low Blow knuckles.
Roughly 120mm wide, hex to hex using stock size hex's.
Gear ratio: 90.1:1
Motor mount spacing: 9mm, designed around the Micro Komodo and similar size motors.
Lower link mounts are 11mm wider than stock and shock mounts are 12mm wider than stock.
NOTES
They will bolt on the Dementor and Valkyrie with our links. Other setups will require modifications.
The pinions have a tiny set screw, it's a pain. I also included some regular screws that you can install and cut off.
INCLUDES
1 - Axle
1 - Servo Mount
Steering Links
Pinions for 1.5mm shaft (2mm available on request)
